Your Account

Home » Workbenches » Overhead Structures » Overhead Shelves » Full Width Shelves

Workbenches

Full Width Shelves

All full width shelves will mount to any workbench that has an overhead structure. Most components are 8" shorter that the worksurface length to keep them within the workstation and to allow room for other articulating accessories. All shelves and other overhead items have infinite height adjustment on the structures uprights.

Products in this category

12" Deep Flat Steel Shelf w/ Side and Rear Lip

This 12" deep 16 gauge full welded shelf mounts to any of our workstations that have overhead structure uprights. We have added back and endplates to the shelf to keep items from falling off.

12" Deep Flat Steel Shelf

This steel shelf is 12" deep and mounts to any of our benches with an overhead structure. The shelf is flat and can adjust in height on the support uprights. This is a perfect shelf to store paperwork and other items essential for the application.

12" Deep Angled Cantilevered Shelf

This steel shelf is 12" deep and mounts to any of our benches with an overhead structure. The shelf has a fixed 30' angle and has a front lip to keep items on the shelf. This is a perfect shelf to store paperwork and other items essential for the process.

16" Deep Flat Cantilevered Shelf

This 16 gauge full welded cantilevered shelf mounts to any of our overhead structure set-ups. This shelf is normally punched for the addition of hoop dividers, and can be enclosed on the sides and rear if necessary.

16" Deep Carton Shelf with (6) Hoops

The full welded carton shelf with hoop dividers will mount to any of our workstations with an overhead structure. The hoop dividers bolt onto the shelf and can be removed if necessary. The shelf will adjust up and down on the suport uprights, and can have other accessories such as tape dispencer holders and spool holders bolted to the bottom of the shelf.

16" Deep Angled Cantilevered Shelf

This style shelf is typically used to store totes or boxes needed for a specific application. The fixed 30' angle will allow the operator to view what is inside each box, and the front lip keeps the boxes on the shelf.

12" Deep Tiltable Shelf

The tiltable shelf is made with all 16 gauge components and will mount to any work table with an overhead structure. This 12" deep shelf adjusts it's angle from flat to 45' with a simple hand knob adjustment and will also adjust in height on the support uprights. There is a 1 1/2" high front lip on all shelves.

72" (4) Sided Shelf

This 12" deep, (4) sided steel cantilevered shelf is the best kept secret with all of our overhead shelving. The full perimeter lip makes this shelf more like a tray, and will keep all items stored on the shelf from falling off.

16" Deep Tiltable Shelf with Front Lip

The tiltable steel shelf will adjust from flat to a 45 degree angle simply by loosening the hand knobs located on each side of the shelf. This 16" deep shelf hangs over the rear of the workbench by 8" to allow for more room over the worksurface. This cantilevered shelf has infinite height adjustment on the support uprights

1 1/4" Laminate Shelf w/ Steel Support

The 1 1/4" thick plastic laminate shelf with steel support will attach to any workstation with an overhead structure. The steel support is fully welded and the shelf attaches with some wood screws from underneath. All shelves will adjust up and down on the support uprights